TOP FIVE APPLIANCE REPAIR PROBLEMS AND THEIR SOLUTIONS

As durable and reliable as they might be, household appliances occasionally break down and need repair. Here are the five most frequent issues appliance repair technicians encounter.

1. Stalled Washing Machine

Have you ever gone to transfer a load from the washer into the dryer only to find it soaking into a soapy bath? Even though the machine might have broken down at the middle of its cycle, the more likely explanation is really a damaged lid or door switch. Since your washer is based on a door sensor to ensure its lid is shut, it may stop running if there’s a problem with the switch. Typically, the change is ruined by rough usage, such as slamming the lid after falling in a load.



2. Cold Dryer

If your dryer stops to carry out its main function, there is a good chance the problem is really a blown thermal fuse. When this component breaks, the dryer won’t create any heat at all.

If the heat returns, the machine should function as expected.

3. Leaky Freezer

Modern freezers periodically complete defrost cycles to rescue homeowners the trouble of defrosting the whole unit from time to time. During the cycles, melted water goes to the drip pan through the defrost drain. But when commercial appliance repair is clogged with food and debris, water will begin to leak out onto the lower shelves.

The Repair: Have an appliance repair technician replace or clean the defrost drain.

4. Washer Won’t Wash

All top-load washing machines rely upon a part called an agitator that is used to swish, swirl, and spin clothing through the entire cycle. When this part will not proceed, the appliance cannot perform its function. Since they frequently assume the problem cannot be fixed, many homeowners just replace their old washer using a one that is new. This is often a mistake, as the fix prices are generally just a fraction of the purchase price of a new unit.

The Fix: Have the motor coupling replaced.

5. Silent Dishwasher

When a dishwasher turns on but does not run, the problem often involves a component called a float button. Used to control the amount of water which enters the machine, the component ensures normal functioning. But as it’s available from within the device, it is possible for a fork, knife, or other item to jam the component, locking it in set position that keeps it from releasing the water required to run the machine.

The Fix: Nine times out of ten, a service technician can remove the object that’s jamming the float switch without damaging the component.

An experienced appliance repair technician may tackle any of the aforementioned issues.